BARR/PRINT390 for IPDS

BARR/PRINT390 for IPDS allows you to connect your channel-attached IPDS printers directly to the print server running on a windows platform anywhere on your TCP/IP network. Your host's PSF will convert the AFP data stream to IPDS and communicate via TCP/IP or SNA directly to your channel attached IPDS printer through the print server.

This module is an integral part of several applications:

• Production Print Management

• Enable Remote Production Printers

• Host Printing

• Replace Channel Extender

• AFP / IPDS Printing

With BARR/PRINT390 for IPDS over SNA, you can connect to MVS mainframes running PSF/MVS through Microsoft's® SNA gateway - Microsoft SNA Server or Microsoft Host Integration Server (HIS) - and use BARR/CHANNEL with ESCON® or Bus & Tag cables as your physical host connection.

With BARR/PRINT390 for IPDS over IP, you can connect to any host through an IP socket.

		Features and Benefits
		Supports up to eight printers per adapter Supports the following Bus & Tag printers: IBM - 3825, 3827, 3828, 3835, 3900 Xerox - IPS printers Océ (Siemens) - 2030-2, 2050-200, 2075-200, 2090-4, 2140-4, 2240-4, 2300-4 Other - IPDS Group3 equivalent printers Control of the printer remains with PSF on the mainframe. All commands for restarting and reprinting remain in one place. Attaches printers to any suitable client computer in the SNA gateway domain Shares the BARR/CHANNEL-OUT adapter with Barr Enterprise Print Server. Supports up to four adapters per installation

Environment

• PCI Rev 2.2 compliant adapter requires one full-height/half-length PCI slot

• 32 bit data path

• Operates in 32 or 64 bit slots

• Operates in either 5 volt or 3.3 volt slots

• Functions in PCI-X slots

• Operates as a Bus Master when transferring data to and from memory

• EMI certified. Meets latest CE/FCC requirements

• Modes of operation: 4.5 and 3 Mbytes/sec Data Streaming and 1.5 Mbytes/sec Interlocked

• Dimensions: 4.2" X 5.75"